My Program
Advanced Tools ๐ถ๏ธ
Mission Control Settings
๐ค Play Robot Startup Melody on Connect
๐ Robot Beep on Command (Chirp)
Turn off to stop the robot from beeping every time it receives a command.
๐ค Random Idle Movements (Fidgeting)
๐ฃ๏ธ Enable Robot's Built-In Mic (Bittle X Only)
If OFF, Bittle will only listen to the Web App's Voice Command button.
๐๏ธ Web App Voice Language
โ ๏ธ Setup Required: Your micro:bit v2 needs a Bluetooth-enabled MakeCode hex file. In MakeCode, add the Bluetooth extension, set No Pairing Required in project settings, then flash to your micro:bit.
๐ micro:bit v2 Connection
Not Connected
๐พ micro:bit Software Setup
This app requires a Bluetooth-enabled program running on your micro:bit v2. Download the pre-built hex file below, then drag it onto the MICROBIT USB drive.
โ
Recommended: Bluetooth hex (LED + Buttons + Temperature)
No pairing required. Enables the LED matrix, scrolling text, Button A/B, and temperature sensor over Bluetooth. Source: kaspersmicrobit docs
โฌ Download hex fileOr build your own in MakeCode
- Open makecode.microbit.org and create a new project.
- Click the gear icon โ Extensions โ search for Bluetooth and add it.
- In the gear icon โ Project Settings, enable No Pairing Required.
- In the on start block, add:
bluetooth start LED service
bluetooth start button service
bluetooth start temperature service - Click Download and copy the .hex file to the MICROBIT drive.
๐ Connection Log
No connection attempts yet.